LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2003 >> S2000 >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Gauges >> Rewriting the ODO Data and Transferring the Maintenance Minder Data to a New Gauge Assembly >> Release Locked odometer mileage to the original gauge assembly

Release Locked odometer mileage to the original gauge assembly

If after you attempt to transfer mileage, the new odometer has dashes (- - -), garbled, or an incorrect value displayed, do the following:

Start over. The original gauge assembly is going to be unlocked and restored to its original state.

  1. Confirm that you have the latest HDS version of software.
  2. Make sure that the HDS shows the correct VIN for the car you are working on.
  3. With the ignition switch to LOCK (0), reconnect the original gauge assembly.
  4. Completely re-boot the HDS.
  5. Clear any stored DTCs.
  6. Navigate to Body Electric/Gauges/Adjustment/ Instrument Panel Replacement.
  7. Select "3. Releasing Locked ODO Value."
  8. Follow the prompts and the odometer mileage will be restored.
  9. Start over and make sure the screen prompts are followed.
scientia non olet · About LEMON Manuals