Rear Seat Belt Buckle

Rear Seat Belt Replacement

NOTE: Check the rear seat belts for damage, and replace them if necessary. Be careful not to damage them during removal and installation.

Seat Belt Buckle

NOTE: Take care not to tear the seams or damage the seat covers.

1. Pull the rear seat up, and hold it with the strap.




2. Detach the hooks (A) and clip, then remove the inner support cover (B).




3. Remove the center anchor bolt (A), and pull the seat belt buckle (B) out, then remove it.

4. Install the seat belt buckle in the reverse order of removal, and note these items:
- Apply liquid thread lock to the center anchor bolt before reinstallation.
- Make sure there are no twists or kinks in the seat belt buckle.




- Assemble the washers on the center anchor bolt as shown.