Honda PGM Tester Method

WARNING: This page is about a different car, the 2002 Honda CR-V. However, it is still accessible from the selected car via links, so may be relevant.

With the ignition switch OFF, connect the Honda PGM tester to the 16P DLC under the drivers side of the dashboard. See Fig 1 .
Turn the ignition switch ON, and follow the prompts on the PGM tester to display the DTC(s) on the screen. After determining the DTC, see DIAGNOSTIC TROUBLE CODE DEFINITIONS .
NOTE: See the Honda PGM tester users manual for specific instructions.

Fig 1: Locating 16P Data Link Connector

Courtesy of AMERICAN HONDA MOTOR CO., INC.