Rear Disc Brake Pads: Inspection

Clean caliper thoroughly; remove any rust, and check for grooves and cracks. Check brake disc for damage and cracks. Measure brake pad thickness. See DISC BRAKE SPECIFICATIONS  . If brake pad thickness is less than service limit, replace pads as a set.

Clean caliper thoroughly; remove any rust and check for grooves and cracks. Check brake disc for damage and cracks. Check thickness of inner pad and outer pad. See DISC BRAKE SPECIFICATIONS  . If pad thickness is less than service limit, replace all pads as a set.

Clean caliper thoroughly; remove any rust, and check for grooves and cracks. Check brake disc fro damage and cracks. Check thickness of inner and outer pads. See DISC BRAKE SPECIFICATIONS  . If brake pad thickness is less than service limit, replace as a set.