LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2000 >> S2000 >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (PGM-FI System) >> Output Shaft (Countershaft) Speed Sensor Replacement

Output Shaft (Countershaft) Speed Sensor Replacement

WARNING: This page is about a different car, the 2009 Honda S2000, 2008 Honda S2000, 2007 Honda S2000, and 2006 Honda S2000. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the output shaft (countershaft) speed sensor 3P connector (A).
    Fig 1: Output Shaft Speed Sensor 3P Connector With Torque Specifications
    G06231780Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Remove the output shaft (countershaft) speed sensor (B).
  3. Install the parts in the reverse order of removal with a new O-ring (C).
scientia non olet · About LEMON Manuals