LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2000 >> S2000 >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Gauges >> VSS Replacement >> '00-05 models

'00-05 models

  1. Raise the vehicle, and make sure it is securely supported.
  2. Disconnect the 3P connector (A) from the vehicle speed sensor (VSS).
    Fig 1: Identifying 3P Connector And Vehicle Speed Sensor (VSS)
    G06232350Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the mounting bolt, then remove the VSS.
  4. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals