LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2000 >> Odyssey EX >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Automatic Transmission Diagnosis - BYBA) >> Output Shaft (Countershaft) Speed Sensor Replacement

Output Shaft (Countershaft) Speed Sensor Replacement

WARNING: This page is about a different car, the 2004 Honda Odyssey, 2003 Honda Odyssey, and 2002 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the output shaft (countershaft) speed sensor connector.
  2. Remove the bolt securing the output shaft (countershaft) speed sensor, then remove the output shaft (countershaft) speed sensor (A) from the transmission housing.
    Fig 1: Removing & Installing Output Shaft (Countershaft) Speed Sensor
    G01502281Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Install the new O-ring (B) on the output shaft (countershaft) speed sensor, then install the output shaft (countershaft) speed sensor in the transmission housing. Do not allow dust or foreign particles to enter the transmission.
  4. Check for rust, dirt, or oil, then connect the connector securely.
scientia non olet · About LEMON Manuals