LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2000 >> Odyssey Cargo >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Automatic Transmission Diagnosis - BYBA) >> Torque Converter Clutch Solenoid Valve Test

Torque Converter Clutch Solenoid Valve Test

WARNING: This page is about a different car, the 2004 Honda Odyssey, 2003 Honda Odyssey, and 2002 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the connector from the torque converter clutch solenoid valve.
    Fig 1: Disconnecting Connector From Torque Converter Clutch Solenoid Valve
    G01502268Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Measure torque converter clutch solenoid valve resistance at the solenoid valve connector (black).

    Standard: 12-25 Ω. 

  3. Replace torque converter clutch solenoid valve if the resistance is out of standard.
  4. If the resistance is within the standard, connect the No. 2 terminal of the torque converter clutch solenoid valve connector to the battery positive terminal, and connect the No. 1 terminal to the battery negative terminal. A clicking sound should be heard.

    Replace torque converter clutch solenoid valve if no clicking sound is heard.

scientia non olet · About LEMON Manuals