Clear A/T DTCs, and PCM Reset Procedures
WARNING: This page is about a different car, the 2004 Honda Odyssey, 2003 Honda Odyssey, and 2002 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the Scan Tool or the HDS to the DLC.
- Turn the ignition switch ON (II).
- Clear the DTC(s) with the scan tool or the HDS.NOTE: You can also reset the memory by removing the No. 13 fuse in the passenger's under-dash fuse/ relay box for more than 10 seconds. If you do, you need to do the following:
- Get the customer's radio and navigation (if equipped) anti-theft code, and write down the radio and navigation presets.
- Enter the radio and navigation (if equipped) anti-theft code, reset the preset stations, and set the clock.
- Do the idle learn procedure (see PCM IDLE LEARN PROCEDURE ).