3rd Clutch Transmission Fluid Pressure Switch Replacement
WARNING: This page is about a different car, the 2004 Honda Odyssey, 2003 Honda Odyssey, and 2002 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the switch cover (A).
- Disconnect the connector from the 3rd clutch transmission fluid pressure switch (B).
- Replace the 3rd clutch transmission fluid pressure switch, then install a new one with a new sealing washer (C). Tighten the switch on the metal part, not the plastic part.
- Reconnect the connector, making sure there is no water, oil, dust, or other foreign particles inside it.
- Install the switch cover.