LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2000 >> Insight >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel Displays & Instrument Panel Gages >> VSS Replacement

VSS Replacement

  1. Disconnect the 3P connector (A) from the VSS (vehicle speed sensor) (B).
    Fig 1: Disconnecting 3-Pin Connector From Vehicle Speed Sensor
    G01427153Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Remove the mounting bolt, then remove the VSS.
  3. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals