LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2000 >> CR-V SE, Standard >> Repair and Diagnosis >> Suspension >> Front Suspension >> Front Suspension System >> Adjustments & Inspection >> Wheel Bearing >> Inspection

Wheel Bearing: Inspection

  1. Wheel bearings require no adjustment. Bearings should be checked for excessive movement. Support vehicle, and remove wheel.
  2. Install dial indicator with stem positioned on front hub surface. Move hub assembly in and out. Note reading. Movement should be 0-.002" (0-.05 mm). If movement is not as specified, replace bearing. See WHEEL BEARING  under REMOVAL & INSTALLATION.
scientia non olet · About LEMON Manuals