Air Bag Restraint System: Diagnostics: Notes

WARNING: Failure to follow service precautions may result in air bag deployment and personal injury. See AIR BAG SAFETY PRECAUTIONS .

WARNING: Use only a digital multimeter with 10 milliamp or less output rating in smallest ohmmeter range. Tester with higher output could damage to air bag circuit or accidental air bag deployment and personal injury.

CAUTION: DO NOT touch tester probe to SRS unit of harness connector terminals. DO NOT connect terminals with a jumper wire. Use Backprobe Adapter (07TAZ-001020A) and SCS Service Connector (07PAZ-0010100).