LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2000 >> CR-V SE, Standard >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Air Bag Restraint System >> Diagnostics >> Erasing Diagnostic Trouble Code Memory >> Erasing DTC Memory Using Honda PGM Tester

Erasing DTC Memory Using Honda PGM Tester

Connect Honda PGM Tester to 16-pin data link connector and follow tester prompts to erase DTC. See Figure .

NOTE: DO NOT use a jumper wire in place of SCS service connector. Jumper wire may be difficult to connect and disconnect quickly enough.