LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2000 >> CR-V SE, Standard >> Repair and Diagnosis >> General Information >> Restraints >> Air Bag Deactivation Procedures >> SUZUKI >> Disabling & Activating Air Bag System >> Activating Air Bag System

Activating Air Bag System

  1. Ensure ignition switch is in LOCK position. Remove ignition key. Ensure AIR BAG fuses are removed. Wait at least 10 SECONDS (90 SECONDS on Grand Vitara and Vitara).
  2. Reconnect driver air bag module and passenger air bag module connectors. Install AIR BAG fuse. Perform SYSTEM OPERATION CHECK .
Fig 1: Locating AIR BAG Fuse (Esteem Shown; Swift Is Similar)
G96I05780Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Fig 2: Locating AIR BAG Fuse (Grand Vitara & Vitara)
G99F00435Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Fig 3: Releasing Yellow Driver Air Bag Module Connector (Esteem & Swift)
G96A05781Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Fig 4: Releasing Yellow Passenger Air Bag Module Connector (Grand Vitara & Vitara Shown; Others Are Similar)
G99H00437Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002