LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2000 >> CR-V SE, Standard >> Repair and Diagnosis >> General Information >> Restraints >> Air Bag Deactivation Procedures >> ISUZU >> Disabling & Activating Air Bag System >> Activating System (Amigo, Rodeo, Trooper & VehiCROSS)

Activating System (Amigo, Rodeo, Trooper & VehiCROSS)

  1. Ensure ignition switch is in LOCK position, and ignition key is removed. Ensure battery is still disconnected or SRS fuse is removed. Connect passenger-side Yellow 2-pin connector. Push in on connectors. DO NOT push on locking sleeve. See Figure. Install glove box assembly. Connect driver-side Yellow 2-pin connector.
  2. Install SRS fuse(s), or connect negative battery cable. Staying well away from air bag modules, turn ignition switch to ON position. Ensure AIR BAG indicator light operates properly, see SYSTEM OPERATION CHECK .
NOTE: When SRS C-21 or SRS-1 fuse is removed and ignition switch is in ON position, AIR BAG indicator light will be on. This is a normal operation and does not indicate an SRS malfunction.
scientia non olet · About LEMON Manuals