LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2000 >> CR-V SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Engine Controls - Self-Diagnostics - 2.2L) >> Diagnostic Trouble Code Identification >> DTC P0335: Crankshaft Position Sensor Circuit >> Circuit Description

Circuit Description

WARNING: This page is about a different car, the 2000 Isuzu Hombre. However, it is still accessible from the selected car via links, so may be relevant.

Powertrain Control Module (PCM) supplies battery power and ground to Crankshaft Position (CKP) sensor. CKP sensor sends a reference signal to PCM 7 times per revolution to indicate crankshaft position and engine speed. The seventh pulse is the sync pulse and is used for crankshaft position reference. PCM calculates when to pulse ignition coils based on these signals.

Conditions for setting this DTC are:

scientia non olet · About LEMON Manuals