LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2000 >> CR-V SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Engine Controls - Self-Diagnostics - 2.2L) >> Diagnostic Trouble Code Identification >> DTC P0105: Map Sensor Performance >> Diagnostic Aids

Diagnostic Aids

WARNING: This page is about a different car, the 2000 Isuzu Hombre. However, it is still accessible from the selected car via links, so may be relevant.

Turn ignition on, with engine off. MAP sensor voltage signal should be 4.5-4.8 volts. Compare this reading with a known-good vehicle with same style MAP sensor. Voltage readings should be within .4 volt of each other. Ensure vacuum source to MAP sensor is free of restrictions. DTC P0105 may also set if the following conditions exist.

scientia non olet · About LEMON Manuals