LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2000 >> CR-V SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Disc Brakes & Drum Brakes) >> Removal & Installation >> Rear Disc Brake Pads >> Installation

Rear Disc Brake Pads: Installation

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2001 Honda Prelude, 2001 Honda Odyssey, 2001 Honda Insight, 2001 Honda Civic, and 2001 Honda CR-V. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply Molykote M77 compound onto pad side of inner and outer pad shims. Install brake pads and shims. Rotate caliper piston clockwise in caliper, if necessary. Ensure cutout in piston aligns with tab on inner pad.
  2. Avoid twisting piston boot. If boot is twisted, back out piston and reposition boot. Install brake caliper and parking brake cable. Install caliper shield. Tighten shield mounting bolts to specification. See TORQUE SPECIFICATIONS  .
  3. Pump brake pedal several times to seat pads. Bleed brakes as necessary. See BLEEDING BRAKE SYSTEM  .
scientia non olet · About LEMON Manuals