LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2000 >> CR-V SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Disc Brakes & Drum Brakes) >> Removal & Installation >> Rear Brake Shoes >> Inspection

Rear Brake Shoes: Inspection

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2001 Honda Prelude, 2001 Honda Odyssey, 2001 Honda Insight, 2001 Honda Civic, and 2001 Honda CR-V. However, it is still accessible from the selected car via links, so may be relevant.

Check self-adjuster lever for worn or damaged ratchet teeth. Inspect brake shoes for distortion, nicks or burrs, and loose, glazed, cracked or oil-soaked linings. Check all springs for weakness and damage. Inspect brake linings for excessive wear and damage. Lining service limit is .080" (2.00 mm) on drum brakes and .04" (1.0 mm) on disc/drums. Replace linings (and springs) in axle sets only. Resurface brake drums when new linings are installed.