Power Brake Booster: Removal
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2001 Honda Prelude, 2001 Honda Odyssey, 2001 Honda Insight, 2001 Honda Civic, and 2001 Honda CR-V. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
On manual transmission models, remove clutch master cylinder and bracket. Do not disconnect clutch hose from reservoir.
Remove master cylinder. See MASTER CYLINDER . Disconnect vacuum hose from power brake booster. On Accord and Prelude models, remove Intake Air Temperature (IAT) sensor from brake booster unit. On Odyssey, remove intake air tube. On all models, from inside vehicle, remove retaining clip from booster rod pin on brake pedal. Remove pin from brake pedal. Remove brake booster mounting nuts. Remove power brake booster assembly from engine compartment.