Front Brake Caliper: Removal
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2001 Honda Prelude, 2001 Honda Odyssey, 2001 Honda Insight, 2001 Honda Civic, and 2001 Honda CR-V. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support front of vehicle. Remove wheels. Remove banjo bolt and copper washers connecting brakeline to caliper. Plug hydraulic line and caliper.
- Detach caliper guide pins or bolts, and remove caliper. DO NOT damage splash guard on upper caliper bolt side (if equipped) during removal. Remove disc pads, pad retainers, upper and lower anti-rattle springs and shim.