Disc Brake Specifications
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2001 Honda Prelude, 2001 Honda Odyssey, 2001 Honda Insight, 2001 Honda Civic, and 2001 Honda CR-V. However, it is still accessible from the selected car via links, so may be relevant.
DISC BRAKE SPECIFICATIONS (FRONT)
| Application | In. (mm) | |||
|---|---|---|---|---|
| Disc Thickness | ||||
| Accord | ||||
| Sedan & Coupe | ||||
| Standard | .90-.91 (22.9-23.1) | |||
| Minimum Refinish Limit | .83 (21.0) | |||
| Civic | ||||
| Standard | .82-.86 (20.9-21.8) | |||
| Minimum Refinish Limit | .75 (19.0) | |||
| CR-V | ||||
| Standard | 0.929-0.937 (22.9-23.1) | |||
| Minimum Refinish Limit | .83 (21.0) | |||
| Insight | ||||
| Standard | .665-.673 (16.9-17.1) | |||
| Minimum Refinish Limit | .59 (15.0) | |||
| Odyssey | ||||
| Standard | 1.10-1.11 (27.9-28.1) | |||
| Minimum Refinish Limit | 1.02 (26.0) | |||
| Prelude | ||||
| Standard | .90-.91 (22.9-23.1) | |||
| Minimum Refinish Limit | .83 (21.0) | |||
| S2000 | ||||
| Standard | .98-.99 (24.9-25.1) | |||
| Minimum Refinish Limit | .91 (23.0) | |||
| Parallelism | .0006 (.015) | |||
| Lateral Runout | .004 (.10) | |||
DISC BRAKE SPECIFICATIONS (REAR)
| Application | In. (mm) | ||
|---|---|---|---|
| Disc Thickness | |||
| Accord | |||
| Standard | .39-.40 (9.9-10.1) | ||
| Minimum Refinish Limit | .31 (8.0) | ||
| Civic & Prelude | |||
| Standard | .35-.36 (8.9-9.1) | ||
| Minimum Refinish Limit | .31 (8.0) | ||
| S2000 | |||
| Standard | .47-.48 (11.9-12.1) | ||
| Minimum Refinish Limit | .39 (10.0) | ||
| Parallelism | |||
| Insight | .0012 (.03) | ||
| Except Insight | .0006 (.015) | ||
| Lateral Runout | |||
| Insight | .002 (.05) | ||
| Except Insight | .004 (.10) | ||