Pedal Height
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2001 Honda Prelude, 2001 Honda Odyssey, 2001 Honda Insight, 2001 Honda Civic, and 2001 Honda CR-V. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect brake switch connector. Loosen brakelight switch lock nut and back off switch until it no longer touches brake pedal. Remove floor mat and measure pedal height from left side center of pedal pad. See Figure
.
- Loosen brake pedal push rod lock nut, and screw push rod in or out until correct pedal height is obtained. See BRAKE PEDAL HEIGHT SPECIFICATIONS
table. Tighten lock nut to specification. See TORQUE SPECIFICATIONS
.
BRAKE PEDAL HEIGHT SPECIFICATIONS
| Application |
Auto. Trans In. (mm) |
Man. Trans. In. (mm) |
| Accord |
5.82 (148) |
5.67 (144) |
| Civic |
6.34 (161) |
6.16 (156.5) |
| CR-V |
6.34 (161) |
6.12 (155) |
| Insight |
|
7.24 (184) |
| Odyssey |
6.45 (164) |
|
| Prelude |
6.50 (165) |
6.34 (161) |
| S2000 |
|
7.04 (179) |