LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2000 >> CR-V SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (Starting System) >> On-Vehicle Testing >> Clutch Interlock Switch Test >> Accord, Civic, CR-V, Prelude & S2000

Accord, Civic, CR-V, Prelude & S2000

WARNING: This page is about a different car, the 2001 Honda Prelude, 2001 Honda Odyssey, 2001 Honda CR-V, and 2001 Honda Accord. However, it is still accessible from the selected car via links, so may be relevant.

Remove driver's side lower instrument panel cover and knee bolster to gain access to clutch interlock switch connector, if necessary. Disconnect 2-pin connector from clutch interlock switch. Using an ohmmeter, check continuity between switch terminals. Clutch interlock switch is normally open. Continuity should not exist when clutch pedal is released. Continuity should exist when clutch pedal is depressed. If readings are not as specified, replace clutch interlock switch.