Rear Disc Brake Pads: Installation
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2001 Isuzu VehiCROSS, 2001 Isuzu Trooper, 2000 Isuzu VehiCROSS, 2000 Isuzu Trooper, and 1999 Isuzu VehiCROSS. However, it is still accessible from the selected car via links, so may be relevant.
- To install, reverse removal procedure. Install NEW pad clips and shims. Apply Silicone grease to caliper sliding surfaces.
- Used pads must be installed to original position. Install pads to caliper support, with wear indicators facing lower side of support bracket. Check parking brake adjustment. See PARKING BRAKE under ADJUSTMENTS.