LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2000 >> CR-V SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Disc & Drum) >> Overhaul >> Wheel Cylinders >> Reassembly

Wheel Cylinders: Reassembly

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2001 Isuzu Rodeo Sport, 2001 Isuzu Rodeo, 2001 Honda Passport, 2000 Isuzu Rodeo, and 2000 Isuzu Amigo. However, it is still accessible from the selected car via links, so may be relevant.

Lubricate cylinder bore with brake assembly fluid. Install expander spring. Place NEW piston cups on pistons, with flare facing center of cylinder. Install piston assemblies into cylinder. Install NEW wheel cylinder dust boots.