LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2000 >> CR-V SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Disc & Drum) >> Bleeding Brake System >> Notes

Bleeding Brake System: Notes

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2001 Isuzu Rodeo Sport, 2001 Isuzu Rodeo, 2001 Honda Passport, 2000 Isuzu Rodeo, and 2000 Isuzu Amigo. However, it is still accessible from the selected car via links, so may be relevant.

Hydraulic system bleeding is necessary any time air has been introduced into system. Bleeding may be done manually, or by using pressure bleeding equipment. Bleed brakes at all 4 wheels if master cylinder has run dry, been replaced or if hydraulic system has been overhauled.

NOTE: For vehicles equipped with Anti-Lock Brake Systems (ABS), see appropriate ANTI-LOCK - 4-WHEEL article.