Adjuster Plug (Hombre): Reassembly

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2000 Isuzu VehiCROSS, 2000 Isuzu Trooper, 2000 Isuzu Rodeo, 2000 Isuzu Hombre, and 2000 Isuzu Amigo. However, it is still accessible from the selected car via links, so may be relevant.

Using Bearing Remover (J-8524-1) and Driver (J-7079-2), install bearing into adjuster plug. Install bearing retainer. Lubricate seal with power steering fluid. Install adjuster plug seal, washer and retaining ring.

NOTE: Retainer projections must not extend beyond washer when retaining ring is seated. Adjuster plug washer must be free to rotate.