Hydraulic System Bleeding: Hombre
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2000 Isuzu VehiCROSS, 2000 Isuzu Trooper, 2000 Isuzu Rodeo, 2000 Isuzu Hombre, and 2000 Isuzu Amigo. However, it is still accessible from the selected car via links, so may be relevant.
- Turn ignition off. Raise and support front of vehicle. Turn steering wheel full left. Fill fluid reservoir to FULL COLD and leave cap off. With engine off, turn steering wheel lock-to-lock at least 20 times. Check fluid level and fill as necessary. Repeat procedure until no air bubbles are present.
- Start engine and let idle. Ensure fluid level is okay. Top off if necessary. Reinstall cap. Return steering wheel to straight-ahead position and lower vehicle. Allow engine to run for 2 minutes. Turn steering wheel in both directions to ensure smooth and quiet operation.