LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2000 >> CR-V SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Power Recirculating Ball) >> Lubrication >> Hydraulic System Bleeding >> Amigo, Passport/Rodeo, Trooper & VehiCROSS

Amigo, Passport/Rodeo, Trooper & VehiCROSS

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2000 Isuzu VehiCROSS, 2000 Isuzu Trooper, 2000 Isuzu Rodeo, 2000 Isuzu Hombre, and 2000 Isuzu Amigo. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fill fluid reservoir and let settle for at least 2 minutes. Start engine (DO NOT turn steering wheel) and let idle for a few seconds. Turn engine off. Add fluid if necessary. Repeat procedure until fluid level remains constant after running engine.
  2. Raise and support front of vehicle. Start engine and turn steering wheel slowly to right and left, lightly contacting wheel stops. Add fluid if necessary. Lower vehicle, turn steering wheel lock-to-lock 2-3 times and return to straight-ahead position. Turn engine off. Check fluid level and fill if necessary. If fluid is foamy, wait a few minutes, then repeat procedure.
scientia non olet · About LEMON Manuals