Installation (Hombre)

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2001 Isuzu VehiCROSS, 2001 Isuzu Trooper, 2001 Isuzu Rodeo Sport, 2001 Isuzu Rodeo, and 2001 Honda Passport. However, it is still accessible from the selected car via links, so may be relevant.

To install, reverse removal procedure. Use Loading tool (J-36202) to adjust torsion bar, using same number of turns recorded in removal procedure. Check riding height. See RIDING HEIGHT under ADJUSTMENTS & INSPECTION. Tighten fasteners to specification. See TORQUE SPECIFICATIONS .

NOTE: Torsion bar ends are marked "L" (Left) or "R" (Right) for location reference. Torsion bar must be installed in correct location.