LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2000 >> CR-V SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Front Suspension) >> Removal & Installation >> Stabilizer Bar >> Installation

Stabilizer Bar: Installation

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2001 Isuzu VehiCROSS, 2001 Isuzu Trooper, 2001 Isuzu Rodeo Sport, 2001 Isuzu Rodeo, and 2001 Honda Passport. However, it is still accessible from the selected car via links, so may be relevant.

To install, reverse removal procedure. Inspect grommets and bushings for wear and damage. Replace grommets or bushings as necessary. Tighten fasteners to specification. See TORQUE SPECIFICATIONS .