Rear Disc Brake Pads: Removal
WARNING: This page is about a different car, the 2000 Isuzu Hombre and 1999 Isuzu Hombre. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support vehicle. Remove rear wheels. Release parking brake fully. Disconnect parking brake cable from caliper. Remove lock bolt.
- Rotate caliper upward and remove caliper from support bracket. Mark pad locations if reusing. Remove pads and shims. Remove and discard pad clips. Depress caliper piston using pliers. Replace brake pads if pad lining thickness is less than .030" (.76 mm).