Rear Disc Brake Pads: Installation

WARNING: This page is about a different car, the 2000 Isuzu Hombre and 1999 Isuzu Hombre. However, it is still accessible from the selected car via links, so may be relevant.

To install, reverse removal procedure. Tighten bolts to specification. See TORQUE SPECIFICATIONS . Install NEW pad clips and shims. Apply Silicone grease to caliper sliding surfaces.
Used pads must be installed to original position. Install pads to caliper support, with wear indicators facing lower side of support bracket. Check parking brake adjustment. See PARKING BRAKE CABLE under ADJUSTMENTS.