LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2000 >> CR-V SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Disc & Drum) >> Removal & Installation >> Master Cylinder >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 2000 Isuzu Hombre and 1999 Isuzu Hombre. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect and plug hydraulic lines at master cylinder. Remove master cylinder from power brake unit. To install, reverse removal procedure. Tighten bolts to specification. See TORQUE SPECIFICATIONS  . Bench bleed master cylinder prior to installation.

scientia non olet · About LEMON Manuals