Master Cylinder: Reassembly

WARNING: This page is about a different car, the 2000 Isuzu Hombre and 1999 Isuzu Hombre. However, it is still accessible from the selected car via links, so may be relevant.

Lubricate master cylinder bore, NEW seals and remaining parts with clean brake fluid. Install spring and retainer into cylinder bore.
Install seals onto piston assemblies and install into cylinder bore. Install snap ring by compressing primary piston. Using NEW grommets, press reservoir onto cylinder body. Bench bleed master cylinder.

Fig 1: Exploded View Of Master Cylinder Assembly

Courtesy of GENERAL MOTORS CORP.