Removal & Installation (2.2L Amigo & Rodeo)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2000 Isuzu VehiCROSS, 2000 Isuzu Trooper, 2000 Isuzu Rodeo, 2000 Isuzu Hombre, and 2000 Isuzu Amigo. However, it is still accessible from the selected car via links, so may be relevant.
Disconnect negative battery cable. Remove spark plug cover on top of valve cover. Disconnect sensor electrical connector. Remove drive belt. Remove top harness cover on timing belt cover. Remove crankshaft pulley. Remove timing belt cover. Remove CMP sensor mounting bolt. Remove CMP sensor. To install, reverse removal procedure. Tighten bolts to specification. See TORQUE SPECIFICATIONS .