LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2000 >> CR-V SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Engine Controls - Self-Diagnostics - 4.3L) >> Diagnostic Trouble Code Identification >> DTC P0602: VCM Not Programmed >> Circuit Description

Circuit Description

WARNING: This page is about a different car, the 2000 Isuzu Hombre. However, it is still accessible from the selected car via links, so may be relevant.

DTC indicates Vehicle Control Module (VCM) internal program is not flashed with vehicle values. If VCM is installed without being flash programmed, engine will not run. DTC P0602 indicates an un-flashed VCM. Engine will crank, but will not start.

Condition required to set DTC is: