LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2000 >> CR-V SE, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Controls - On-Vehicle Adjustments >> Idle Speed & Mixture >> Idle Speed (Prelude) >> Step "B"

Step "B"

  1. Turn ignition off. Reconnect IAC valve 2-pin connector. Perform PCM reset procedure. See SELF-DIAGNOSTICS - INTRODUCTION article. Start engine and allow to idle with no electrical loads.
  2. Check engine idle speed after one minute. See IDLE SPEED SPECIFICATIONS (PRELUDE)  table. If idle speed is as specified, go to Step "C" . If idle speed is not as specified, go to TROUBLE SHOOTING - NO CODES article.
scientia non olet · About LEMON Manuals