LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2000 >> CR-V SE, Standard >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Removal & Installation >> Front Brake Caliper >> Removal

Front Brake Caliper: Removal

  1. Raise and support front of vehicle. Remove wheels. Remove banjo bolt and copper washers connecting brakeline to caliper. Plug hydraulic line and caliper.
  2. Detach caliper guide pins or bolts, and remove caliper. DO NOT damage splash guard on upper caliper bolt side (if equipped) during removal. Remove disc pads, pad retainers, upper and lower anti-rattle springs and shim.
scientia non olet · About LEMON Manuals