LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2000 >> CR-V SE, Standard >> Repair and Diagnosis >> Body & Frame >> Mirrors >> Power Mirror System >> Symptom Tests >> Prelude >> Both Mirrors Inoperative

Both Mirrors Inoperative

  1. Check fuse No. 9 (7.5-amp). Replace as required. Remove power mirror switch. Disconnect 10-pin and 2-pin (Canadian models) connectors from switch. See POWER MIRROR SWITCH  under REMOVAL & INSTALLATION.
  2. Turn ignition on. Using a voltmeter, check for voltage between power mirror switch connector terminal A9 (Yellow/Black wire) and ground. See Figure. If battery voltage exists, go to next step. If battery voltage does not exist, repair open in Yellow/Black wire between mirror switch and fuse box.
  3. Using an ohmmeter, check for continuity between power mirror connector terminal A10 (Black wire) and ground. If continuity does not exist, repair open circuit in Black wire or poor ground connection. If wiring is okay, substitute a known-good switch and retest.