LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2000 >> CR-V SE, Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Window Motors & Regulators >> Power Window System >> Adjustments >> Door Glass >> Civic (Sedan)

Civic (Sedan)

  1. Raise glass fully. Loosen glass mounting bolts (front) or roller guide bolts and regulator mounting bolts. Push glass rearward (front door) or forward (rear door). See Figure . Tighten glass mounting or roller guide bolts and regulator mounting bolts.
  2. Loosen front channel mounting bolt (front door) or rear channel mounting bolt (rear door). Lower glass. Push front or rear channel against glass, then tighten mounting bolts. Repeat as necessary. Check for leaks using low pressure water.
scientia non olet · About LEMON Manuals