LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2000 >> CR-V SE, Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Steering Column Switches >> Removal & Installation >> Combination Switch >> Removal & Installation (Odyssey & S2000)

Removal & Installation (Odyssey & S2000)

Disable air bag system. Remove steering wheel. See STEERING WHEEL . Remove cable reel. See AIR BAG RESTRAINT SYSTEMS article. On Accord, remove driver's side instrument panel lower cover. On Odyssey, set steering column to neutral position (so centerline of column is in straight line). On all vehicles, remove steering column covers. Disconnect connectors from combination switch. Remove mounting screws and remove combination switch. To install, reverse removal procedure.