LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2000 >> CR-V SE, Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Gauges & Instrument Panels >> Removal & Installation >> Center Panel >> Removal & Installation

Removal & Installation

  1. Remove driver's side instrument panel lower cover and knee bolster. Remove glove box. On vehicles with automatic transmission, go to next step. On vehicles with manual transmission, go to step  3 .
  2. Remove lower console cover. Remove 6 screws securing center pocket. On right side of center pocket, carefully insert flat-blade screwdriver and push down on top of retaining hook. Remove center pocket with beverage holder. Go to step  4 .
  3. Remove shift lever knob, screws and clips and remove center console. Remove 4 screws and remove center upper pocket. Go to next step.
  4. Remove 4 screws and center instrument panel lower cover. Remove 2 bolts, release 6 clips and remove center panel. Disconnect electrical connectors and antenna lead. To install, reverse removal procedure.
scientia non olet · About LEMON Manuals