Valve Springs: Installation
NOTE:
Before installing valves in cylinder head, coat stems with oil, install and check for smooth movement.
Install in reverse of removal procedure. Install springs with closely wound coil end towards spring seat. Check valve spring installed height, and adjust as necessary.
VALVE SPRING INSTALLED HEIGHT SPECIFICATIONS
| Application | In. (mm) | ||
|---|---|---|---|
| 1.3L, 1.5L, & 1.75L | |||
| Auxiliary Valve Spring | .98 (25.0) | ||
| Intake & Exhaust | |||
| Inner Valve Spring | 1.40 (35.6) | ||
| Outer Valve Spring | 1.49 (37.8) | ||
| 1.8L | |||
| Auxiliary Valve Spring | .98 (25.0) | ||
| Intake | 1.66 (42.2) | ||
| Exhaust | |||
| Inner Valve Spring | 1.46 (37.0) | ||
| Outer Valve Spring | 1.67 (42.3) | ||