Valve Guide Servicing: Removal
Heat cylinder head to 300°F (150°C). Using exact valve guide driver and working on combustion chamber side of head, drive guide out top side of head.
VALVE GUIDE DRIVER TOOL SPECIFICATIONS
| Application | Tool | ||||||
|---|---|---|---|---|---|---|---|
| 1.3L & 1.5L | |||||||
| Remover | |||||||
| Exhaust | 07942-6570100 | ||||||
| Intake | 07942-6570100 | ||||||
| Installer | |||||||
| Exhaust | (1) 07943-6890100 | ||||||
| Intake | (1) 07943-6890100 | ||||||
| 1.75L | |||||||
| Remover | |||||||
| Exhaust | 07742-SA50000 | ||||||
| Intake | 07742-SA50000 | ||||||
| Installer | |||||||
| Exhaust | (1) 07943-SA50000 | ||||||
| Intake | (1) 07943-SA50000 | ||||||
| 1.8L | |||||||
| Remover | |||||||
| Exhaust | 07942-8230000 | ||||||
| Intake | 07942-6570100 | ||||||
| Installer | |||||||
| Exhaust | (2) 07943-SA50000 | ||||||
| Intake | (2) 07943-6890100 | ||||||
|
|||||||
NOTE:
It may be necessary to remove some valve guides using an air hammer.