LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 1983 >> Prelude Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.3L 4-CYL, 1.5L 4-CYL, 1.75L 4-CYL & 1.8L 4-CYL >> Removal & Installation >> Camshaft >> Removal

Removal & Installation: Camshaft: Removal

Remove timing belt and camshaft pulley. See TIMING BELT  and CAMSHAFT PULLEY. Starting at the ends and working toward middle, loosen rocker arm bolts 2 turns at a time in a criss-cross pattern. When fully loosened, remove rocker assembly from cylinder head. Lift out camshaft and seal.

scientia non olet · About LEMON Manuals