LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 1983 >> Prelude Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.3L 4-CYL, 1.5L 4-CYL, 1.75L 4-CYL & 1.8L 4-CYL >> Removal & Installation >> Camshaft >> Installation

Removal & Installation: Camshaft: Installation

  1. Oil camshaft journals and bearing surfaces in caps and cylinder head. Install camshaft with keyway pointing upward (No. 1 piston at TDC). On 1.8L engine, install oil seal with spring side facing in. Install rocker arm assembly.
  2. Starting with bolts at middle of rocker arm assembly and working outward in a circular pattern, tighten all bolts to 9 ft. lbs. (12 N.m). Tighten 8 mm bolts only to 16 ft. lbs. (22 N.m).
  3. Install remaining components in reverse order of removal. Before installing cam cover gasket, apply non-hardening sealant to upper rounded surface of front and rear camshaft caps.
scientia non olet · About LEMON Manuals