LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 1983 >> Prelude Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.3L 4-CYL, 1.5L 4-CYL, 1.75L 4-CYL & 1.8L 4-CYL >> Overhaul >> Piston & Rod Assembly >> Removal

Piston & Rod Assembly: Removal

  1. Remove oil pan and cylinder head. Remove any ridge from top of cylinder bore. Mark connecting rod and cap for cylinder identification.
    NOTE: DO NOT  confuse number stamped on connecting rod and cap with number indicating position of assembly in engine. This number indicates rod big end bore size only.
  2. Remove rod cap. Push piston and rod assembly out top of cylinder block. Install cap on rod from which removed.
scientia non olet · About LEMON Manuals